| Product Description |
Shield your fair complexion from harmful UV rays with our Sunscreen For Light Skin. This specially formulated sunscreen provides broad-spectrum protection against UVA and UVB rays, helping to prevent sunburn, premature aging, and skin damage.
|
The Sunscreen For Light Skin is lightweight, non-greasy, and perfect for everyday wear. Infused with nourishing ingredients like vitamin E and aloe vera, it not only protects but also nourishes your skin, leaving it feeling soft and smooth.
|
- To use, apply a generous amount of Sunscreen For Light Skin to clean, dry skin at least 15 minutes before sun exposure.
- Reapply every two hours or after swimming or sweating for maximum protection.
- Remember to layer it over your moisturizer and under your makeup for a seamless application.
|
Product Description For Sunscreen For Light Skin
|
- Price:
$179.98 - $89.99
- (as of Feb 27, 2024 21:51:47 UTC – Details)
|
|
Why are LEDMO outdoor lighting products more expensive than on the market?
|
Why does LEDMO choose a thick aluminum substrate?
- For commercial lighting, the lighting time is very long, and the lamp beads work for a long time.
- The aluminum substrate inlaid with lamp beads must be thicker, Easier to dissipate heat, and longer in service life.
- If you use a thin aluminum substrate, it is difficult to dissipate heat, which can cause the lamp beads to burn out.
- Parking lot light will fail within a year.
|
How does LEDMO configure high-quality and high-efficiency drive power for outdoor lights
- The power factor is required to be above 0.9. If the power factor is lower than 0.6, it belongs to unqualified or junk products.
- It not only has a short service life but also consumes more electricity than the nominal value, No power saving effect.
- At the same time, the current harmonics are also large, and the current is unstable.
- It is detrimental to the lamp bead life and the overall lamp life.
|
Based on the above knowledge, LEDMO is equipped with instruments and personnel to test and screen the power supply
|
| Attribute |
Content |
| Title |
How does LEDMO choose high-quality lamp beads for outdoor lights for yard?
|
| Key Points |
- The key to different quality LED chips is their lifespan
- Lifetime is determined by light decay
- Low light attenuation, long life, long life and expensive
- The chip quality determines the brightness and light decay of the lamp beads
- Good lamp beads not only have high luminous intensity
- And light decay is also small. This can only be verified through time comparison
- After a year of use, the brightness of inferior products began to darken
- The LEDMO team passed repeated screening tests, Retained high-quality lamp bead suppliers
|
| Testing Process |
- Test the antistatic ability of lamp beads
- And leakage current of lamp beads, etc
- Lamp beads with strong antistatic capability have a long service life
- Only lamp beads with an antistatic capacity greater than 700V are suitable for high-quality lamps
- LED lamp beads are unidirectional conductive light emitting bodies. If there is a reverse current
- LED with high leakage current has a short lifespan
|
| Title |
Why did LEDMO choose a die-cast aluminum housing (frosted texture)?
|
| Reasons for Choice |
- Different from other lamps’ oily finish, our exterior lights are made of the top matte texture finish
- Heavy-duty die-casting aluminum housing with anti-corrosion bronze finish ensure long-lasting durability
- Provide good heat dissipation, durable, and longer service life
- Completely waterproof and dustproof
- Applicable to damp and humid places
- Non-glare and neighbor-friendly LED wall components
- Can always provide stable and bright white light of 5000K for outdoor safety lighting
|
| Title |
Why are LEDMO photocells more sensitive and save electricity?
|
| Comparison |
- Compared with others’ plastic photocell sensor, our light fixtures take the copper sensor instead of the cheap sensor
- With the copper sensor, the wall sconce is with higher sensitivity and not easy to break
|
| Features |
| LED Wall Pack Commercial Grade – The Wall Pack fixture is shatter resistant, extreme temperature tested, and has an IP65 rating, meaning it can handle all weather conditions. This makes it the perfect outdoor led light fixture for buildings and outdoor areas. |
| LED Wall Pack Lights Reduce your electricity running cost with up to 80% by replacing 450-750 HOLOGEN MH/HIP/HID bulbs with 120W LED. |
| LED wall packs are non toxic, unlike traditional HID wall packs, and will not fade over time, so you can enjoy a consistent high output light. |
| IP65 waterproof, even in humid conditions, rainy season, heavy snow and other bad weather will not seep. |
| Use of US standard mounting plates: Exterior light fixture use round mounting plates for high load bearing and stable installation, the wall sconces will fit anywhere you want it to. |
| LED Street Light Commercial Grade Material – led street area lights are made of die-casting aluminum body with polyester powder-coated finish. The scientific design helps the exterior light post top to dissipate better, achieve the best use of the led lighting. IP65 waterproof and 6K high voltage surge protection for drying, wet environment, sandstorms, snowstorms, and harsh weather conditions. |
Reviews
There are no reviews yet.