Sculpsure Versus Coolsculpting
Sculpsure and CoolSculpting are two popular non-surgical fat reduction procedures. They work by freezing the fat cells in the body, which causes them to drain out of the body naturally over time. Sculpsure is designed specifically to remove scaring around the abdomen, while CoolSculpting can be used anywhere on the body.
In this guide, we review the aspects of Sculpsure Versus Coolsculpting, sculpsure vs coolsculpting price, sculpsure vs coolsculpting pain, and sculpsure vs coolsculpting side effects.
Sculpsure Versus Coolsculpting
Both Sculpture and Coolsculpting are focused on fat reduction. They offer different benefits and results, so it is important to know the differences between these two treatments.
The lifespan of the effects.
One of the biggest differences between SculptSculpt and CoolSculpting is that SculpSure is non-invasive and CoolSculpting uses a controlled cooling process to freeze fat cells. This means that there are no needles involved with SculpSure, so it’s less painful than CoolSculpting, although this can depend on which area you’re treating.
CoolSculpting is FDA approved to treat the abdomen, love handles (flanks), inner thighs and back of arms. Although some people have had success targeting other areas such as saddlebags or bra rolls with Coolsculpting after several sessions; this isn’t officially part of their treatment protocol as it hasn’t been tested for safety yet by the FDA but even without official approval many people have reported seeing results here too!
The advantage with SculpSure over Coolsculpting is its ease of use: There’s no need for anesthesia when using this device because it doesn’t require any injections or needles whatsoever! However if you want faster results from your procedure then we recommend using something like [this] before hand so that you can get rid of stubborn fat deposits much quicker than usual without having any downtime at all afterwards either.”
Potential side effects.
SculptSculpt is a non-invasive procedure, meaning that there are no side effects. However, CoolSculpting has been associated with some side effects, such as bruising and swelling after the procedure.
The device can also cause skin irritation in sensitive patients.
Cost
If you’re looking for a way to reduce your body fat and inches while also saving money, SculpSure may be a viable option. Compared with other cosmetic treatments that can cost thousands of dollars, SculpSure is an affordable alternative. Even though it’s less expensive than other options, however, it still requires you to pay out-of-pocket because it isn’t covered by insurance.
If you decide to go with CoolSculpting instead of SculpSure or another option altogether—which could include liposuction—a single treatment costs between $1,000 and $2,000 depending on the area being treated and whether or not you choose to have additional treatments done at some point in the future. However, if your health plan covers these procedures then this might make things much easier on your wallet
Efficacy
Coolsculpting works by using vibrations to break down the fat cells in your body, but Sculpsure is a lot more invasive. The process involves a wand with many needles that is inserted into your skin and pushed through the fat layer, which breaks up the cells. You’ll be able to see results after just one treatment—but those results are only temporary. Both options will leave you feeling sore afterward, so it’s best to take some time off work if you want to look your best for an event or evening out!
- Price. Sculpture’s somewhat higher price tag is one of the reasons CoolSculpting has gained popularity as an alternative to SculpSure.
- Results. Both procedures yield similar results, but it appears that SculpSure may provide slightly better results than CoolSculpting in terms of fat reduction and body contouring (though this isn’t conclusive).
- Side effects and pain level. One major advantage to both procedures is they’re non-invasive, which means they don’t require anesthesia or surgery and there’s no downtime after treatment—you can resume your normal activities immediately following each session! However, while both are considered safe on all skin types, CoolSculpting does appear to have a slightly lower risk of side effects than SculpSure due to its lower temperature setting (see above).
- Treatment time: The duration between treatments for each procedure varies based on your individual needs; however, when you compare the average person who wants their flanks treated first with four sessions per side versus someone who wants their entire back treated at once with 10 sessions total (15 total), it would take roughly twice as long for them both if they received SculpSure instead of CoolSculpting because each session lasts longer with this device than what we recommend patients do during theirs.”
sculpsure vs coolsculpting price
During the past 5 years, we’ve seen quite a few new technologies for non-invasive fat reduction, including Exilis, Liposonix, Zerona, CoolSculpting, and now, SculpSure. CoolSculpting has been the industry favorite for the past few years. SculpSure is a little different than CoolSculpting, and they both have advantages and drawbacks, so which is better? Find out in this head-to-head face-off of CoolSculpting vs. SculpSure:
Great results shouldn’t come at the cost of safety. Both SculpSure and CoolSculpting have been shown to be extremely safe, and have been approved by the FDA for their safety and efficacy.
CoolSculpting is FDA-Approved to remove up to 22% of fat in the treatment area, over a period of a few weeks to a few months, following a single treatment2,3*. SculpSure is FDA-Cleared to remove up to 24% of fat in the treatment area, over a period of a few weeks to a few months, following a single treatment1*. However, both procedures’ results vary from person to person, and a 2% change is by no means visible to the human eye. So don’t make these numbers your deciding factor.
CoolSculpting has come out with even more handpieces throughout the last year, allowing for smaller treatment areas making it more competitive with SculpSure in both time and versatility.
Winner: More or Less a Tie
SculpSure is a very comfortable procedure, and doesn’t require numbing. That’s because of the precision a laser allows. Just like the lasers in laser hair removal target the hair follicle without damaging the surrounding skin, the SculpSure laser targets only the fat cells, and protects the skin from any ambient heating with a smart cooling cycle. There is also an ability with SculpSure, to adjust the treatment to the individual patient’s comfort level. If a certain area feels too warm, that particular laser panel can be turned down, to achieve a comfortable treatment. CoolSculpting works by damaging the fat cells with cold, using a suction-based handpiece. Just as you might experience numbing with icing after an injury, some patients experience numbing during the procedure, and immediately following the procedure. Occasionally, patients report this numbness as discomfort. With the new CoolSculpting CoolAdvantage system, treatments are more comfortable, with fewer reports of tingling or long-lasting numbness.
Winner: More or Less a Tie
For our practice, the difference in cost between the two procedures is generally very small. We’re happy to quote your specific procedure costs during your complimentary consultation. For example, say you want to target your love handles, and they’re medium-sized (about the size of 2 iphone 5’s). For SculpSure, you’ll likely need 4 panels, with 2 positioned on each side, for a single 25-minute treatment. That would cost $1500. For CoolSculpting, you would need 2 small handpieces, run for an hour each (1 per side of the body), at $750 a handpiece, which totals $1500.
Want a personalized quote? Call us at (732) 356-1666 to schedule your complimentary body sculpting consult.
CoolSculpting uses a treatment handpiece that allows 1 area to be treated at a time. Each treatment cycle is 35-60 minutes, depending on the handpiece style used (which is determined by the area treated and your individual anatomy). With the newer handpieces, Coolsculpting is now boasting a shorter time of 35 minutes. If your desired treatment area is mirrored on the other side of your body, as with love handles, saddlebags, chin fat and bra fat, then you’ll need 2 treatments. Treatments on different areas can be treated one after another, in the same appointment.
SculpSure uses up to 4 laser treatment panels per 25-minute session. If your desired treatment areas are on opposite side of your body but are small enough in the total area to be covered by 2 treatment panels, then you can treat those 2 areas simultaneously. You can treat up to 4 different locations, totaling 100 square centimeters in a single SculpSure treatment. If you have two or three larger areas, SculpSure treatment sessions can be run one after another, during the same appointment.
With CoolSculpting, patients can expect the treated area to remain numb and red for a few hours after treatment. This may somewhat limit you in your choice of clothing (if you wish to conceal the treatment). Other than that, neither has any downtime or recovery period.
With both technologies, the results are in the fit of the handpiece to your body. CoolSculpting has several different handpieces with unique curves and depths to fit all kinds of body parts, but since the system is rounded, it’s best-suited to rolls of fat. SculpSure’s panels are flat, so they don’t work as well on rolls, but they do work well for people with a thin, even layer of fat, large or small. Our practice offers both of these technologies and makes recommendations for our patients based on a physical exam where we determine which technology will best fit your body.
Ready to melt fat without surgery? Call us today to schedule your complimentary consultation.
With both of these technologies, the results are in the fit of the handpiece to your body. CoolSculpting has several different handpieces with unique curves and depths to fit all kinds of body parts, but since the system is rounded, it’s best-suited to rolls of fat. SculpSure’s panels are flat, so they don’t work as well on rolls, but they do work well for people with a thin, even layer of fat. Our practice offers both of these technologies and makes recommendations for our patients based on a physical exam where we determine which technology will best fit your body.
sculpsure vs coolsculpting pain
CoolSculpting and Sculpsure are two leading body contouring treatments that generate faster fat reduction results without surgery or downtime. As completely non-invasive treatments, they reduce stubborn fat cells across the body by destroying them with their cutting-edge technologies. These easy ‘walk-in, walk-out’ treatments have boomed in popularity in recent years thanks to their ability to cut through the fat and sculpt the body in precise and effortless ways.
Individuals can strategically reduce their fat bulges much more efficiently than standard fat-burning sessions at the gym. The technologies also rival surgical techniques like liposuction, which have declined in popularity by 40% since the year 2000 according to the British Association of Aesthetic Plastic Surgeons. These new non-surgical alternatives offer the same lipo results without any surgical side effects, recovery time or scarring involved. But which procedure has the edge? This article compares the two treatments to explain which one wins out for superior fat elimination.
Body Contouring with CoolSculpting and Sculpsure
It is perhaps no surprise why fat removal treatments like CoolSculpting and Sculpsure are proving to be so popular. It has been revealed that 64% of people worldwide said that looking fit and healthy is a key factor for boosting their self-confidence. The report also highlighted how over half of consumers would consider having a non-surgical body contouring treatment to stay in shape.
With over 8 million CoolSculpting treatments having been performed worldwide so far, the fat reduction stats are backing up this non-surgical trend. Patients can now destroy fat cells from key areas of the body like the stomach, thighs, love handles, arms and even under the chin, without having to rely on constant gym sessions and going under the knife. But how do these body sculpting treatments do this, and what advanced technologies do they rely upon to cut through fat with such minimal effort. The answer lies in a non-invasive fat breakdown procedure called lipolysis.
What is Lipolysis?
Lipolysis involves the physical destruction of subcutaneous fat cells in the body – the wobbly type of fat that sits just below the skin’s surface. Adipose tissues around the body store fat in the form of lipids (fat cells) and comprise 20-25% of a person’s total body mass. The process of lipolysis reduces these fat-storing tissues by breaking the fat cells down into much smaller molecules through disruptive techniques like ultrasound, freezing and laser energies. These mechanisms crystalise and break up fact cells into much smaller molecules, which are then naturally absorbed into the bloodstream and slowly eliminated from the body over time.
This fat removal process can take up to three months to complete, but once it has occurred, fat cells are permanently destroyed. The surgical method of liposuction also removes these tissues by making small incisions into the skin and sucking out fat cells in the process. But it can leave patients with bruising, swelling and a risk of infection for up to six weeks after treatment. Non-invasive lipolysis treatments have emerged as safe and effective go-to alternatives, with clinically proven fat loss results.
Sculpsure vs CoolSculpting : what do they do?
The FDA approved both CoolSculpting and Sculpsure as safe and clinically proven aesthetic treatments to permanently destroy fat cells. Sculpsure was approved in 2006, while CoolSculpting was approved in 2010. The treatments both reduce the appearance of unwanted fat bulges, but they use different methods to do so.
The purpose of each treatment:
Sculpsure: fat reduction using heat energy
Sculpsure uses heat energy to break up fat tissues. Fat cells are more sensitive to temperature fluctuations than surrounding tissues, and Sculpsure takes advantage of this by applying heat energy to disrupt fat cells without damaging the skin in the process. It can take up to 3 months to see visible results after the fat cells have been naturally removed from the body.
CoolSculpting: fat reduction using cooling energy
Like Sculpsure, CoolSculpting gets rid of fat cells, but it subjects them to extremely cold temperatures to break them down instead. The body flushes out these fat cells as soon as they have been crystalised with the cooling energy. Like Sculpsure, it can take up to 3 months to notice the visible fat reduction results. But once this has happened, patients can enjoy a trimmer and better-defined physique.
CoolSculpting vs Sculpsure : How do they work?
The main difference between the two procedures is the type of lipolysis technology they use to dissolve and break up fat tissues. Sculpsure uses laser heat technology to melt away fat cells, while CoolSculpting freezes them away using its advanced cryolipolysis (or fat freezing) procedure.
CoolSculpting: cryolipolysis (fat freezing)
Cryolipolysis is an innovative fat reduction procedure that eliminates fat cells by literally freezing them to death. Two scientists at Harvard University developed it after they noticed that children lost pockets of fat in their cheeks when eating ice cream and popsicle treats. During the treatment, fat is frozen using specialised applicator cups which hug the skin. A special gel is applied to the skin first to protect healthy tissues and make the experience comfortable. Controlled cooling energy is then transmitted into the target fat cells across the body to physically destroy them. Upon application, the fat cells crystalise and break down before being naturally dispelled from the body.
Sculpsure: laser lipolysis (fat heating)
Sculpsure breaks down subcutaneous fat cells by emitting pulses of laser heat energy into the sub-dermal layer of the skin. Fat is melted away with flat applicators that are laid across the stubborn fat deposits. These applicators are also combined with cooling plates to regulate temperatures and keep them comfortable throughout the experience. Once the fat cells have been liquified by the laser heat energy, the body’s immune system will naturally remove the dead cells a few weeks after, with visible results coming through up to 3 months post-procedure.
In both treatment methods, treated areas will look smoother, slimmer and much more defined than ever before.
CoolSculpting vs Sculpsure Treatment areas
CoolSculpting beats Sculpsure when it comes to the types of areas that you can treat. It can sculpt and re-contour up to 13 different areas of the body, making it a holistic and long-lasting way to reduce fat across key problem areas. CoolSculpting has been FDA approved to treat:
Discover how our patients have transformed their body shapes in our CoolSculpting before and after photo gallery.
Sculpsure has been FDA-approved to treat a more restricted range of areas, but it is still able to target bulges of fat build-up across key areas of the body, including:
CoolSculpting vs Sculpsure: Treatment sessions and duration
A typical CoolSculpting treatment lasts between 25 minutes to 1 hour. Only one body area could be treated at one time when CoolSculpting was first introduced. But thanks to the introduction of newly improved CoolSculpting Elite applicators, different areas of the body can be treated in just one sitting. Most people need just one to two CoolSculpting sessions to achieve the results they are looking for.
Sculpsure is a slightly quicker fat removal treatment, which is why it has become known as the “lunchtime lipo” procedure. A typical session takes just 25 minutes to complete, and 4 areas may be treated at one time.
Bear in mind that different patients may benefit from a different number of treatment sessions depending on their own unique needs. So seek out a personalised consultation with a qualified body contouring technician to determine the exact time estimate for your own treatment programme.
CoolSculpting v Sculpsure: Ideal patients
CoolSculpting and Sculpsure work best on people who are in relatively good physical shapes, but who want to shift stubborn areas of fat. We advise patients not to use the treatments as a direct replacement for healthy lifestyle activities like diet and exercise. If patients don’t stay healthy after having the treatments, then fat stores can certainly return.
However, the treatments are game-changing in their ability to reduce stubborn fat in areas that are typically hard to sculpt, like the abdominal muscles or the love handles for example. Individuals with a BMI under 30.5 are suitable for Sculpsure. Whereas CoolSculpting can help patients with a higher-than-average BMI, including those physically considered as overweight.
CoolSculpting vs Sculpsure Results – Is Sculpsure better than CoolSculpting
Clinical studies have proven that both technologies are effective at permanently destroying targeted fat cells. However, CoolSculpting has more clinical data to support it as a world-class fat reduction treatment. In just one treatment session, patients can reduce their subcutaneous fat cells by up to 27%.
What is the downtime for CoolSculpting and Sculpsure?
Because they’re both non-invasive treatments, the great thing is that there’s no downtime with either, so you can get on with your day as usual after both CoolSculpting and SculpSure. Compared to a surgical treatment such as liposuction, where you’re recovering for months, this is pretty impressive.

sculpsure vs coolsculpting side effects.
CoolSculpting is a procedure that uses controlled cooling to freeze fat cells to death. CoolSculpting eliminates fat cells precisely where an applicator is focused, making it an excellent choice for the targeted removal of stubborn, excess fat. It is a non-surgical procedure, so patients can return home the same day as their treatment.
What is Lipolysis?
Lipolysis is the name for a type of non-invasive procedure that uses lasers to eliminate unwanted fat cells and change the overall shape of your body. Lipolysis can also involve radio wave treatments or injections; however, laser treatments are most commonly used. This type of treatment typically targets relatively small pockets of excess, unwanted fat, and is not recommended for very overweight or obese individuals.
What is Sculpsure?
Sculpsure is a type of lipolysis treatment. Sculpsure uses lasers to target and reduce or eliminate excess and unwanted fat. Multiple areas can be targeted at once, and a single procedure only takes approximately 25 minutes.
Fat Reduction vs. Weight Loss
If you are considering Sculpsure or CoolSculpting, it is important to note that these are fat reduction procedures that are not meant to result in significant weight loss. Sculpsure and CoolSculpting are considered body contouring processes. While they result in the elimination of fat cells (and some patients report that fat cells do not return to treated areas if and when they do gain weight following their procedure), the main purpose of these processes is to eliminate stubborn fat that has not been eliminated through diet, exercise, and other lifestyle choices. Therefore, these procedures should not be considered a substitution for weight loss, and are not recommended to severely overweight or obese patients. Body contouring processes are ideal for those who have already reached their goal weight, and are seeking to reduce or eliminate stubborn fat pockets that are negatively affecting their overall silhouette.
Differences Between CoolSculpting vs SculpSure
The main difference between CoolSculpting and SculpSure is temperature. CoolSculpting uses precisely controlled freezing to freeze and kill fat cells, while SculpSure uses laser technology to target and eliminate fat cells. Both are non-invasive, outpatient procedures that take a relatively short amount of time, and patients can generally resume their regular activities immediately following the procedure.
In addition, while SculpSure can treat multiple areas at once, CoolSculpting can only treat one area at a time.
Sculpsure Vs. CoolSculpting: Which One Should You Choose?
If you are struggling with stubborn fat that weight loss and lifestyle changes are unable to eliminate — such as a double chin or love handles — and are interested in a non-invasive body contouring procedure or a non-surgical alternative to liposuction, either Sculpsure and CoolSculpting may be ideal for you. However, there are some differences between the procedures, which may help you determine which procedure is ideal for addressing your specific body contouring concerns and desired outcomes.
Safety
Both CoolSculpting and Sculpsure are FDA-approved procedures, and are completely safe when performed by a trained and accredited medical professional. There are some contraindications for both procedures, such as open wounds, a history of hernias around the treated area, pregnancy, skin conditions such as dermatitis or eczema, and some neuropathic disorders. Consult with your doctor or cosmetic surgeon to determine if you are a suitable candidate for CoolSculpting or Sculpsure.
Side Effects
With both procedures, side effects are minimal. However, CoolSculpting patients are likely to experience bruising, redness, tenderness and swelling around the treatment area, since the CoolSculpting applicator involves the use of suction. Sculpsure patients, on the other hand, experience only temporary redness.
Application
CoolSculpting uses suction, combined with a cooling panel, in order to freeze and kill fat cells. Sculpsure uses a laser that is applied directly to the skin. In both cases, the patient can be seated or lying down, and no anaesthesia is required, as both procedures are painless (CoolSculpting can cause some discomfort among those who find extremely cold temperatures difficult to handle.)
Procedure Recovery
After a CoolSculpting procedure, patients will require localized massage at the treatment area, which is performed at the clinic, in order to improve the efficacy of the treatment, after which time they can return home. CoolSculpting patients may experience side effects — such as tenderness and bruising — for up to two weeks following their procedure.
Sculpsure patients may experience some temporary redness, but this should subside shortly after the procedure.
In both cases, there is no required downtime.
Cost
Both CoolSculpting and Sculpsure are comparable in cost. For a CoolSculpting procedure, you will be charged by how many handpieces are required for your treatment; in the case of Sculpsure, you will be charged per laser panel. How much you spend will ultimately be determined by the size of the area you are having treated.
Scarring
Both procedures are completely non-invasive, and will result in no scarring.
Area
CoolSculpting and SculpSure can both be used on a number of areas of concern. Thighs, love handles, the lower belly or abdomen, upper arms and chin are areas where these types of procedures are commonly used.